2. Safety and Protection information
HB-200 V00
Page 8
2. Safety and protection information
General safety & application guidelines
1)
I
t is not allowed to clean asbestos containing surfaces with high-pressure, unless using
special equipment.
2)
P
ersons under the influence of alcohol, drugs or medicine should not operate the machine.
3)
D
o not touch plug and socket with wet hands.
4)
T
his machine has been constructed for use with Nilfisk-ALTO detergents. The use of
other detergents or chemicals may cause problems as to the operation and the safety.
5)
W
hen using detergents the instructions should always be strictly observed.
6)
A
lways flush the machine with clean water after use of chemical/detergents.
7)
A
lways unplug power supply when cleaning and maintaining the machine.
8)
D
o not use machine if important parts are damaged – i.e. safety devices, high-pressure
hoses, spray handle.
9)
T
he user is obliged to observe all national working environment and working safety
regulations concerning “operation of high-pressure washers”.
10)
I
t is not allowed to connect this machine directly to a potable water supply.
11)
I
f the machine is to be connected to potable water supply it is strictly necessary to fit the
machine with a water break tank, in accordance with EN1717.
Safety devices
The machine is equipped with the following safety devices:
1)
S
top button. The stop button stops the machine when pushed.
2)
L
ocking device on spray-gun handle. The locking device prevents the trigger from being
activated when pulled out.
3)
T
hermal sensor and over load relay protects the motor against overloading. The machine
can be switched on again after a few minutes, when the sensor has cooled.
4)
B
urner safety devices; the burner safety device protects the machine against faulty
ignition.
DO
DON’T
