1. Getting acquainted with your High Pressure Cleaner
C-200Air V16
Page 4
Unpacking
Remove the High Pressure Cleaner and its accessories from the packing material. For
transport and packing reasons some accessories may be supplied disassembled.
Make sure all components are present:
•
High-pressure machine itself
•
Handle bar (partly attached)
•
Wing nuts for the handle bar
•
Electrical cord (attached)
•
High pressure hose with Spray-gun trigger
•
Double barrel lance (disassembled)
•
Water inlet male hose coupling
Machine Installation / Setup
A
ttach the handle bar to the machine using the wing nuts and bolts supplied and align the
handle bar according to the cabinet moulding.
M
ount the high-pressure hose on to the High Pressure Cleaner by pulling back
the retainer on the high-pressure hose coupling, while sliding it onto the male
outlet of the unloader till a click sound could be heard.
A
ssemble the double barrel spray-lance. To mount the
assembled spray-lance on to the Spray-gun trigger, pull
forward the front of the Spray-gun trigger (A) while
sliding in the male swivel coupling part of the spray-lance.
(B)
(A)
(B)
