background image

 

 Rev. A, January 2021 

 

Bone-Cutter Operator’s Manual                                                                                                                                  

ii

 

© Copyright 2021 by DEMTECH Services, Inc. 

 

All Rights Reserved

 

 

Scope of Manual:

 

 

This manual contains procedures for safety, general unpacking, 

set-up, and operation of your DEMTECH Services, Inc. Bone-Cutter. 

 
The text of this publication, or any part thereof, may not be reproduced or transmitted in any 
form or by any means, electronic or mechanical, including photocopying, recording, storage in 
an information retrieval system, or otherwise, without prior written permission of DEMTECH 
Services, Inc. 
 

Notice

 

 
Patents have been granted and/or patent applications are pending or are in the process of 
preparation on all DEMTECH Services, Inc. developments. 
 
The material in the manual is for informational purposes only and is subject to change without 
notice. 
 
DEMTECH Services, Inc. assumes no responsibility for any errors that may appear in this 
manual. 
 

 
 
 

Manual Number: 

BC-OPERATOR’S MANUAL, Revision: A 

 

DEMTECH Services, Inc. 

6414 Capitol Avenue Diamond Springs, CA 95619 U.S.A. 

Telephone: (530) 621-3200 

Toll Free: (888) 324-9353 

Fax: (530) 621-0150 

Web Site: 

www.demtech.com

 

 

Summary of Contents for Bone-Cutter BC-100/A













Reviews: