Demco CR 108, Operator'S Manual

Page: 22 / 104

22
After the first twenty-four (24) hours of use, perform the
following maintenance procedures:
1. Re-torque all suspension bolts and axle u-bolts. Torque
specifications (as shown on the following page) are
also on a decal located on the trailer sub-frame above the
suspension.
2. Re-torque all wheel lug nuts.
3. Check all clearance lights, turn signal indicators, and
stop lights.
4. Inspect all brake hoses and airlines for kinks and leaks.
5. Check hub oilers for leaks or low levels.
6. Inspect hydraulic lines and valves for leaks, chaffing
or crimped lines.
Break-in
procedure
Operating Instructions