Demco CR 108, Operator'S Manual

Page: 35 / 104

35
Haldex Commercial Vehicle Systems specifies very few requirements
when welding on a trailer equipped with a Haldex ABS System:
Weld only when the trailer is not attached to
the towing vehicle.
Take precautionary measures to protect
against extreme heat, flying slag and/or
molten metal.
Never connect power to the 7-pin
connector or to the ABS System when
welding on the trailer.
Haldex does not require the disconnection of any ABS wire harnesses
when welding on the trailer due to the fact that the ECU circuits have
been specially designed to protect against transient voltages which can
occur during welding.
For additional information or assistance, contact your local Haldex
Sales Professional or a member of the Haldex ABS Engineering Team
at (816) 891-2470.
www.hbsna.com
L55134
2/03 5M CM L55134
SER
VICE
BULLETIN
Welding on Trailers Equipped with
Haldex ABS Products
I n n o v a t i v e V e h i c l e T e c h n o l o g y