www.demaeng.com
1-800-325-3362
I-1091
Page 2 of 8
Rev. C-40014 08/08/14
Overall Dimensions
Installation & Preparation
1. Identify desired location of dispenser. Remove cardboard mounting template from packaging, place
against wall and mark hole locations using the template as a guide.
[For accuracy, use level with template to ensure the dispenser is level on the wall]
2. Install all four supplied anchors into marked hole locations from step 1. Using supplied screws, install
top two screws and hang dispenser from them. Install bottom two screws through dispenser holes
into the anchors.
3. Tighten screws against dispenser to assure a secure fit.
4. Install Drip Tray by sliding into place against
tab in back of drip tray holder.
[Optional: Drill 3/16” hole into drip tray barb and
attach ¼” ID hose (not supplied) for draining
chemical from drip tray (
Figure 1
)
Figure 1
