5
[email protected] | 1.877.502.3434
www.delviro.com
1
ZIP LIGHT
INSTALLATION INSTRUCTIONS
Flush Mounting
Lens
AC Wires
#8 Screws (Quantity:4)
1.
Disconnect the electrical power on the electrical panel prior to installing the Zip Light fixture.
2.
Remove lens to reveal the gear tray.
3.
Remove the gear tray by removing the #8 screws at each end. Place the gear tray in safe location.
4.
Connect AC wires (GND, LINE, NEUTRAL) from back of Zip Light to respective AC wires in junction box in ceiling and neatly place
wires in junction box
5.
Attach fixture to ceiling surface using #12 screws at the location indicated. Ensure correct fastener is chosen for respective
surface type.
6.
Attach gear tray and lens back on to fixture.
7.
Ensure Zip Light fixture is connected to a timer, relay system, motion detector or switch so that it can be activated easily.
8.
Check all connections for open loops and replace loose or damaged wires if necessary
9.
Turn the electrical power on from the electrical panel.
10.
Test the connection by turning on the timer, relay system, motion detector or light switch that the Zip Light fixture is
connected to.
Junction Box (Recessed in Ceiling)
Screw Locations
2
3
4
5
