2
[email protected] | 1.877.502.3434
www.delviro.com
1
5.
Pull the existing wire from the Zip Light fixture into the junction box. Use a strain relief on the access plate if required. Connect
the appropriate wires using wire nuts (Black to Black, White to White and Green to Ground wire). Ensure the ground wire is also
grounded to the junction box using a ground screw. The wire from the Zip Light fixture can be tie wrapped to the aircraft cable
but also has to be independently supported to the ceiling or roof. Check to see if the Zip Light fixture is securely in place and that
the Aircraft Cable is properly attached to the ceiling and the fixture.
6.
Ensure Zip Light fixture is connected to a timer, relay system, motion detector or switch so that it can be activated easily.
7.
Check all connections for open loops and replace loose or damaged wires if necessary.
8.
Turn the electrical power on from the electrical power.
9.
Test the connection by turning on the timer, relay system, motion detector or light switch that the Zip Light fixture is connected to.
ZIP LIGHT
INSTALLATION INSTRUCTIONS
