DeLuxe Stitcher M19 Series, Operation And Maintenance Manual

Page: 8 / 48

Always disconnect the power supply before
making any adjustments or servicing the stitcher.

WARNING
!
Assembly (Figure 1)
Figure 1 - Assembly
P2731
7690
M11009
PG10271
HN3816
7691
PW38
7693
WIRE SPOOL
CORRECT
PAYOFF
PW14.2 (2)
15154 or
G20278AA
15150A or
G20286A
G30144
LW14 (2)
UA1420.1 (2)
LW38
K1033
Clincher
Mount
Assembly
M7201B
7423 (2)
425 (2)
63
203B (2)
38 (2)
7645A
Some assembly is required upon delivery of the M19 Stitcher. You will need a flat screwdriver and a
9/16” open end wrench. Remove the packing materials from around the M19 and all contents from the
shipping boxes. Mount the Spool Bracket (G30144) to the outside of the Left Guard (G30143) with
two (2) Hex Head Cap Screws (UA1420.1), through two (2) Plain Washers (PW14.2) and two (2) Lock
Washers (LW14). Locate the Spool Stud (7693) and remove the Hex Nut (HN3816), Washer (PW38) and
Lock Washer (LW38) from the one end. Insert the threaded end of the Spool Stud into Spool Bar Bracket.
Replace the Washers and Hex Nut. Loosen the Thumb Screw (P2731) in the Set Collar (7691) to remove
it and the Tension Spring (7690) from the Spool Stud. Slide the Wire Spool over the Spool Stud, making
7