DeLuxe Stitcher M19 Series, Operation And Maintenance Manual

Page: 24 / 48

Note: At this point it may be necessary to reselect one (1) of the nine (9) Control Collar slots for the
Brake Spring Tang (release Actuator Lever, remove the Clutch Spring tang from the slot, then move
Control Collar axially toward the Input Hub end and rotate it opposite to the drive direction to pick
up the next slot). Continue to select Control Collar slots until the 0.38" to 0.50" specification is
achieved.
Assemble the Retaining Ring to the Output Shaft at the Input Hub end (the smooth surface fac-
ing the Input Hub). Check the end play between the Input Hub and the Retaining Ring with feeler
gauge. There should be 0.002" to 0.003" end play on the Input Hub.
Reassemble the unit to the machine.
Note: After the Clutch is assembled to the machine, the Clutch Plate should be free to float on
bearing - the Anchor Strap is only there to prevent rotation of the plate.
23
Figure 13 - Clutch-Brake
850892
850962
850891
850889
850880
850991
851125 (2)
851321
850886
850998 or
850999
851126 or
851127
Actuator Assembly with
Plunger
850974
850890
850889
850886
split cam design control collar
Retaining
Ring
Drive
Sleeve
Stop Cam
Coupling
Sleeve
Brake
Sleeve
850994
851124