Delton WF2414 User Manual Download

Page: 7 / 60

150Mbps/300Mbps Wireless-N AP / Repeater / Router client

User Manual

Introduction

1.1.

Product Overview

150Mbps/300Mbps Wireless-N AP/ Repeater/ Router client is dedicated to Small

Office/Home Office (SOHO) Wireless network solution. It is 4 in 1 network device, which

combines wireless access point, firewall, 4-port Switch and the NAT-Router. It provides up to

150Mbps/300Mbps data transmission rate in 2.4GHz frequency, complies with IEEE 802.11n,

IEEE 802.11g and IEEE802.11b and backwards compatible with all IEEE 802.11n/g/b

devices. And the router also supports wireless LAN up to 128-bit WEP, WPA/WPA2

encryption security. The 150Mbps/300Mbps Wireless-N AP/ Repeater / Router client also

provides WEB and Remote Management and system log so that network administrators can

manage and monitor the network in real time.

The 150Mbps/300Mbps Wireless-N AP/ Repeater/ Router client also provides a hardware

WPS (Wi-Fi protected setup) button, which helps you setup a secure wireless network in a

snap. The button lets you activate the wireless protection easily.

1.2.

Main Features

Comply with IEEE802.11n/g/b, IEEE802.3 10Base-T, IEEE802.3u 100Base-TX

standards

Support DHCP Client, PPPoE Client, Static IP,

upport multi-wireless mode: AP, WDS, AP+WDS, repeater, client, etc.

Support static ARP, MAC filtering, IP access control, DNS filter

Support FTP, PPTP and L2TP pass through

Support UPNP (universal plug and play)

Upgradeable firmware for future functions

WPS button can easily setup a secure network

Support WMM

Support data encryption mode: WEP, WPA, WPA2

Support DMZ

1.3.

Supporting Standard and Protocol

IEEE 802.11b/g/n

Summary of Contents for WF2414





























































Search results

Summary of Contents for WF2414

Reviews:

Related manuals for WF2414

Brands by name

Popular brands

Delton WF2414, User Manual

Search results

Summary of Contents for WF2414

Reviews:

Related manuals for WF2414

Brands by name

Popular brands