Delton WF2414 User Manual Download

Page: 3 / 60

150Mbps/300Mbps Wireless-N AP / Repeater / Router client

User Manual

Package Contents

The following items should be found in your package:

150Mbps/300Mbps Wireless-N AP/ Repeater/ Router client

Power Adapter

CD-Rom

Ethernet cable

Make sure that the package contains above items. If any of the above items is missing or

damaged, please contact the store you bought this product from.

Brand and Copyright Announcement

Netis Corporation.

is a registered trademark of Netis Corporation. Other trademarks and trade

names may be used in this document to refer to either the entities claiming the marks and

names or their products.

Reproduction in any manner without the permission of Netis Corporation is strictly

forbidden

All the information in this document is subject to change without notice.

USA/Canada Technical Support

Phone: 1-866-71-network or 1-866-716-3896 (free in USA & Canada)

E-mail:

[email protected]

Summary of Contents for WF2414





























































Search results

Summary of Contents for WF2414

Reviews:

Related manuals for WF2414

Brands by name

Popular brands

Delton WF2414, User Manual

Search results

Summary of Contents for WF2414

Reviews:

Related manuals for WF2414

Brands by name

Popular brands