Delton WF2414 User Manual Download | Manualshive

Page: 37 / 60

background image

150Mbps/300Mbps Wireless-N AP / Repeater / Router client

User Manual

36

you set is not in accord with the value ISP provide, it may causes some problems, such as

fail to send Email, or fail to browse website. So if that happen, you can contact your ISP for

more information and correct your router’s MTU value.

Ø

Primary DNS: The DNS server translates domain or website names into IP address, input

the most common DNS server address you used or provided by your ISP.

Ø

Secondary DNS: Input IP address of a backup DNS server or you can leave this field

blank.

4.4.1.2. Wireless Access

Figure 4-19

Ø

SSID:SSID (Service Set Identifier) is your wireless network's name shared among all

points in a wireless network. The SSID must be identical for all devices in the wireless

network. It is case-sensitive and must not exceed 32 characters. Make sure all points in the

wireless network have the same SSID. For added security, you should change the default

SSID to a unique name.

Ø

Authentication Type: “None” means do not encrypt wireless data.

Ø

Internet Access Type: Ask for your ISP to get the correct access type.

Ø

IP: The IP address you obtained after connect to the Internet, if you haven’t connected to

the Internet yet, this field is 0.0.0.0.

Ø

Subnet Mask: The Subnet mask you obtained after connect to the Internet, if you haven’t

connected to Internet yet, this field is 0.0.0.0.

Ø

Gateway: The IP address of Default gateway you obtained after connect to the Internet, if

you haven’t connected to Internet yet, this field is 0.0.0.0.

Ø

MTU: The MTU (Maximum Transmission Unit) setting specifies the largest packet size

permitted for network transmission. Most DSL users should use the value 1492.You can

set MTU manually, and you should leave this value in the 1200 to 1500 range. If the value

«
...
35
36
37
38
39
...
»

Summary of Contents for WF2414





























































Reviews:

No comments

Related manuals for WF2414

Brand: Watchguard Pages: 2

Brand: IgniteNet Pages: 63

Brand: O muvit Pages: 20

Brand: STARLINK Pages: 2

Brand: Ubiquiti Pages: 24

Brand: Obihai Pages: 4

Brand: EnGenius Pages: 117

Brand: SoftBank Pages: 231

Brand: Linksys Pages: 17

Brand: Silvercrest Pages: 20

Brand: Silvercrest Pages: 66

MUSIC TO GO SKHL 40 A2

Brand: Silvercrest Pages: 175

Brand: Speco Pages: 4

MiFi 500 LTE Mobile Hotspot

Brand: Novatel Pages: 9

Brand: Novatel Pages: 123

Brand: Novatel Pages: 108

ORiNOCO AP-9200R

Brand: Proxim Pages: 30

Brand: Nortel Pages: 130

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands