Notsi, Ltd., Bulgaria, 9027 Varna, Troleyna 12 street
Ph.: 00359 899 822010 ; Fax: 00359 52 507227
Web:
www.deltapulse.eu
; E-mail:
Mole Impulse Pro operation manual
4
ground is up to 6 meters. At this depth is possible to find out different metal
objects and ammunition. Please, when children work with the detector they must
be controlled, and the finds must be dig out from elderly. The extraction of the
finds is in whole at yours responsibility. The manufacturer and the dealer have
not responsibility.
PREPARING FOR OPERATION
It is important to be observed this direction for reaching to the maximal depth
of searching. Go outside at a place without metal objects, connect the coil with
the device, and switch on the POWER at position “1”. Leave the device to
operate for about 5 minutes to stabilize his work. Lift out the coil of the searcher
far away from metal objects. Set the buttons POWER, GAIN, THRESHOLD and
NOISE at position 10, and the button SIGNAL at position around
“7”. Take down
the coil to the ground at 20 cm above the surface and press the button FAST
ZERO for about 3 seconds. The signal tone slowly disappears. Keep the coil
immovable for several seconds. If you hear a tone, turn the buttons POWER and
THRESHOLD with one position to the left (9) and if the tone do not longer heard,
this mean that the device is ready to work. If you hear arbitrary tone, go on once
more to the left with one position (8). When it is necessary to throw off small
metal objects like nails, lids, wires and others useless objects, then set the button
SIGNAL to position from “8” up to “10”. If you want to increase the sensitivity of
the device at normal soil, in
crease SIGNAL to maximal position of “6-7”. Please
make a test with SIGNAL to determine the maximal sensitivity.
