Deltafox DG-CGC 1080 Set 3in1, Translation Of The Original Instructions For Use

Page: 71 / 140

71
GB
- Clean the blade
(with an oily cloth);
- Oil the blade shaft
with an oil can or
spray.
• Slight notches on the
blades can be evened
out. For this, sand
down the blades with an oil stone.
Only sharp blades can cut properly.
• Blunt, bent or damaged blades must
be changed.
• Clean the spray attachment (
13) with clean water while wearing
personal protective equipment (e.g.
gloves, safety googles).
Dispose of the liquids in accordance
with the instructions provided by the
manufacturer of the water-soluble
plant protection agent.
• Do not use any aggressive cleaning
agents to clean the spray
attachment ( 13).
• If blocked, clean the nozzle ( 18)
with a thin needle.
We are not liable for damage caused by
the use of the unit if the original cause
was improper repair or the use of non-
original parts or through use other than
that designated in this manual.
Storage
• Keep the equipment in the blade
guard supplied, dry and out of reach
of children.
• Empty and clean the spray attach-
ment ( 13) prior to storage.
Disposal and the
environment
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Electrical devices must not be dis-
posed of with domestic waste.
Do not dispose of batteries in house-
hold waste, fire (risk of explosion) or
water. Damaged batteries may dam-
age the environment and your health
if toxic fumes or liquids leak out.
• Dispose of the equipment in accord-
ance with the local regulations. Take
the equipment to a collection point,
where it will be recycled in an environ-
mentally friendly manner. For informa-
tion about this, ask your local waste
management company or our service
centre.
• Defective units returned to us will be
disposed of for free.
• Place cut branches in compost and
not in the dustbin.
• Dispose of the liquids in accordance
with the instructions provided by the
manufacturer.