VIVOTEK
User's Manual - 407
© 2019 VIVOTEK INC. All Right Reserved
272
PARAMETER
VALUE
DESCRIPTION
getpanangle
<integer>
Get the current pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
gettilt
0, <positive integer> Get the current tilt position.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
gettiltangle
<integer>
Get the current tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
getzoom
0, <positive integer> Get the current zoom position.
getratio
<decimal>
Get the current zoom ratio.
getfocus
0, <positive integer> Get the current focus position.
getminspeedlv 0, <positive integer> Get the minimum speed level of the PTZ control. Normally,
the speed level is ‘0,’ which denotes halting a continuous
movement.
getmaxptspeedlv 0, <positive integer> Get the maximum speed level of pan/tilt moving.
*Only available when
"capability_camctrl_c<0~(n-1)>_buildinpt" > 0
getmaxzspeedlv 0, <positive integer> Get the maximum speed level of zoom moving.
getmaxfspeedlv 0, <positive integer> Get the maximum speed level of focus moving.
getminpan
0, <positive integer> Get the lower limit for pan position.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
getmaxpan
0, <positive integer> Get the upper limit for pan position.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
getminpanangle <integer>
Get the lower limit for pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
getmaxpanangle <integer>
Get the upper limit for pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
getmintilt
0, <positive integer> Get the lower limit for tilt position.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
getmaxtilt
0, <positive integer> Get the upper limit for tilt position.
*Only available when bit1 of
© 2019 VIVOTEK INC. All Right Reserved
273
PARAMETER
VALUE
DESCRIPTION
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
getmintiltangle <integer>
Get the lower limit for tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
getmaxtiltangle <integer>
Get the upper limit for tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
getminzoom
0, <positive integer> Get the lower limit for zoom position.
getmaxzoom
0, <positive integer> Get the upper limit for zoom position.
getmaxdzoom 0, <positive integer> Get the upper limit for digital zoom position.
getmaxratio
<decimal>
Get the maximum ratio of optical zoom.
* We support this parameter when the version number
(getversion) is equal or greater than 5.0.0.14
getmaxdratio
<decimal>
Get the maximum ratio of digital zoom.
* We support this parameter when the version number
(getversion) is equal or greater than 5.0.0.14
getminfocus
0, <positive integer> Get the lower limit for focus position.
getmaxfocus
0, <positive integer> Get the upper limit for focus position.
8.28
Recall
(capability_camctrl_c<0~(n-1)>_zoommodule = 1)
Note:
This request requires Viewer privileges.
Method:
GET
Syntax:
http://<
servername
>/cgi-bin/viewer/recall.cgi?
recall=<value>[&channel=<value>][&return=
<return page>
]
PARAMETER
VALUE
DESCRIPTION
recall
string[30]
One of the present positions to recall.
channel
0~"
capability_nvideoin"-1
Channel of the video source.
