6
Quick installation guide for RPI M50A inverters
Planning the installation
5
>50 cm
>30 cm
>30 cm
>30 cm
>20 cm
►
Ensure adequate air circulation Hot air must be able
to dissipate upward Keep enough space around each
inverter
►
Do not install inverters directly above one another
Otherwise, the upper inverter is warmed up by the
lower one
►
Consider the
operating temperature range
(see sec-
tion “Technical data”)
When the operating temperature range is exceeded,
the solar inverter reduces the amount of power gener-
ated
Ambient temperature and air circulation
Outdoor installations
►
The solar inverter has protection
degree IP65 and can be installed
indoors or in protected outdoor
areas (that means outdoor but
protected by a roof against direct
sun, rain or snow)
►
Mount the solar inverter vertically
Where to mount the inverter
??
??
✔
✘
✘
►
Mount the solar inverter so that the
LEDs and display can be easily seen
and that the buttons can be operated
Make sure the reading angle and instal-
lation height are sufficient.
►
Always use the mounting plate
supplied with the solar inverter
►
Check that the wall is capable
of bearing the heavy load of the
device
►
Use dowels and screws that are
suitable for the wall material and
the heavy weight
►
Mount the solar inverter on a
vibration-free wall to avoid disrup-
tive vibrations
►
Possible noise emissions can
be disruptive when the device is
used in living areas or in buildings
with animals Therefore, choose
your installation location carefully
Mounting orientation
►
The solar inverter is very heavy,
see section “Technical data” The
solar inverter must be lifted and
carried by at least three people
74 kg