background image

15

Model: 

RAD80L

 WARRANTY

DELTA ELECTRONICS THREE YEAR LIMITED WARRANTY
Delta Electronics Inc. (“Delta Electronics”) warrants to the original consumer purchaser in the USA that the Breez 
ventilation fan products will be free from defects in material or workmanship. This warranty is limited to three (3) 
years from the original date of purchase.
Limitations and Exclusions
1.   During the warranty period, a replacement for any defective product will be supplied free of charge for installation 

by the consumer. The warranty provided herein does not cover charges for labor or other costs incurred in the 
troubleshooting, repair, removal, and installation service.

2.   All returns of defective parts or products must include the product model number, and must be made through an 

authorized Delta Electronics distributor. Authorized returns must be shipped prepaid. Repaired or replacement 
products will be shipped by Delta Electronics F.O.B. shipping point.

3.   Delta Electronics shall not be liable for any indirect, incidental, consequential, punitive, or special damages 

arising out of or in connection with products use or performance, regardless of the form of action whether in 
contract, tort (including negligence), strict product liability or otherwise.

4. 
5.  The warranty does not cover if user does not comply with manufacturer’s installation manual.
6.  To qualify for warranty service, you must notify Delta Electronics at the address or telephone number below.
7.   Delta Electronics shall have no liability to the original owner-user with respect to any defect caused by abuse, 

misuse, neglect, improper transportation or storage, improper testing, improper installation, improper operation, 

accident of products or parts thereof, or unusual deterioration or degradation of products or parts thereof due to 

Address: 4405 Cushing Parkway, Fremont, CA 94538
US Toll Free Number: 1-888-979-9889

Summary of Contents for RAD80L

















Reviews: