7
Model:
RAD80L
ASSEMBLY INSTRUCTIONS
2. Connecting the duct
CAUTION:
All ducting must comply with local
and national building codes.
a. Insert the duct into the duct connector and tape
all duct work connections to make them secure
and air tight.
b.
as shown in Figure 2-2.
Install the duct with a gradient of 1°-2° to the outside.
3. Remove the fan junction box cover
a
. Using wire
nuts (not supplied), connect house wires to fan
wires
b
as shown in the wiring diagram on page
10. Wire connections are as follows: black to live
switch wire, white to neutral, green to ground.
Reattach fan junction box cover
c
.
Turning angle too large
Duct shrink
Too many elbows
Elbow near the body
Body
a
c
b
2-1
2-2
3-1
Summary of Contents for RAD80L
Page 16: ...16 Model RAD80L ...
