10 Maintenance
Cleaning/replacing the fan module
Installation and Operation Manual for Solar Power Inverter M70A EU V2.0 EN 2020-08-03
130
10.7 Cleaning/replacing the fan module
DANGER
Electric shock
Potentially fatal voltages are present in the
inverter during operation. When the inverter
is disconnected from all power sources, this
voltage remains in the inverter for up to 60
seconds.
►
Perform the instructions listed in “10.4 Mak-
ing preparations for maintenance work - dis-
connecting the inverter from the grid (AC)
and solar modules (DC)”, page 115
before
you start work on the inverter!
Do not use any sharp, pointed or hard objects
for cleaning.
Do not use liquids for cleaning.
∫
The screws are very small and can easily fall
down. You should therefore use a magnetic
screwdriver.
The fan module is located on the left side of the inverter.
