7
Model:
ITG70LED / VFB070B4LED1
ASSEMBLY INSTRUCTIONS
5. Remove the wiring box cover from the Fan Body
❶
.
Remove the wiring knockout from the wiring box
cover with a flathead screwdriver (not included).
6. Remove the three screws that hold the fan motor
assembly in place. Remove the fan motor assembly
from the Fan Body
❶
. Unplug fan connector.
7. Pull the wire through the hole and into the junction
box(not included), secure 120VAC house wiring
from the wall diagram on page4. 14AWG is the
smallest conductor that shall be used for branch-
circuit wiring.
Push the wires back through the hole. Reattach the
wiring box cover.
8. Install a circular 4 in. duct (not included) and secure
it with duct tape or clamps (neither included).
Mount the Fan Body
❶
to the joist or stud using
nails (not included) were indicated.
9. Plug the fan assembly back into the Fan Body
❶
.
Reattach the fan assembly using the three screws.
Plug fan connector.
9.4"
9.4"
7 1/ 2 in.
7 1/4 in.
3
1
1
1
1
1
5
6
7
8
9
