Delta Embedded System Operation Manual- E200 Series
5-2
_5
5.1
Unpack and check the delivery package
Please take note of the following when opening the delivery:
●
Do not dispose the original packaging in case you have to reuse it to transport the device again.
●
Please keep the enclosed disc drive containing the documentation in a safe place.
●
Check the device for any transport damage at the time of delivery.
●
Verify the packing list for the completeness of the packaging contents and any accessories.
●
If the contents of the packaging are damaged or do not match your order, please contact our customer
service.
5.2
Transportation
Well-packaged devices are suited for all kinds of transportation. During long-distance transport, pay attention
to the following:
●
Do not store the device in open cabin or carriage.
●
No device is to keep in an outdoor storage during transit.
●
Avoid transporting the products together with flammable, explosive and corrosive items.
●
Keep the device dry and do not expose to rain, snow or any liquid substances to avoid damage the
device.
5.3
Storage requirements
In order to store the products, please view the following points:
●
Store the product in its original packaging. Please refer to the spec sheet for storage temperature and
relative humidity.
●
Do not store any harmful gas, flammable, explosive products and corrosive chemicals.
●
The device is stored without vibrations, shocks, and strong magnetic interference.
●
Keep at least 10cm distance between the packing box and the ground and at least 50cm distance from
the wall, heat source, cooling source, window or air inlet.
CAUTION
！！
Risk of damage to the device
！
When transporting the device in cold weather, please pay attention to the
extreme changes in temperature. Make sure no water drop (condensation) is
build up on the surface or inside the device. If condensation develops, please
wait at least 12 hours before switching on the device.
