Make sure that all wiring is secured, the specified wires are used, and there is no strain on the terminal
connections or wires.
3.
If refrigerant gas leaks during installation, ventilate the area immediately. Do not directly touch refrigerant
that has leaked from refrigerant pipes or other areas, as there is a danger of frostbite.
4.
Before serving or cleaning unit, switch power off and disconnect power supply.
5.
When cutting or drilling into wall or ceiling, do not damage electrical wiring or hidden utilities.
6.
Be sure to use only the specified accessories and parts for installation work.
7.
This appliance is intended to be used by expert or trained users in shops, in light industry and on farms,
or for commercial use by lay persons”
.
Caution
:
1. Install the HEX on a wall/ door strong enough to withstand the weight of the unit.
2. Do not allow a child to mount on the outdoor unit or avoid placing any object on it.
3. Do not block air inlets or exits.
4. Do not install the HEX at any place where there is a danger or flammable gas leakage.
5. To avoid injury, do not touch the air inlet or aluminum fins of unit.
6. Watch your steps at the time of fin cleaning or HEX inspection.
7. Do not topple the HEX while moving or storage.
8. The appliance is not to be used by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction.
9. Children being supervised not to play with the appliance.
