Page 4.
GBR
80 SERIES GBR100 SERIES
Low speed air volume preset control
Humidity preset control
MODELS GBR
80HL / GBR80MHL
8.25”
5.75”
2.5”
4” Duct
11”
5.75”
8.25”
11”
8”
11”
11”
5. OPERATION
5-1.
Humidity control mode: Turn the POWER switch on to operate at
humidity control mode - the LED indicator will be blue. When
the ambient humidity is higher than the user -adjustable set
-point, the fan will run at full speed. When the ambient humidity
is lower than the set-point, the fan will continue to run at the full
speed until a 10-minute time delay has elapsed, and then will
automatically change to the user -adjustable low speed airflow.
5-2.
Humidity tolerance is about ±10%. Long -time operation will
influence the detecting precision as dust accumulates. The
humidity switch may need to be adjusted.
For Models: GBR80HL, GBR100HL
5-3.
Full speed mode: Turn the MODE switch on to operate at full
speed mode - the LED indicator will be amber.
For Models: GBR80MHL, GBR100MHL
5-4.
When motion is detected, the fan will run at full speed and the
LED indicator will be amber. When motion is not detected, the
fan will continue to run at the full speed until a 10-minute time
delay has elapsed.
6. MAINTENANCE
WARNING:
Disconnect power source before working on unit. Routine
maintenance must be done every year.
CAUTION:
1.
Never use gasoline, benzene, thinner or any other such
chemicals for cleaning the ventilating fan.
2.
Do not allow water to enter motor.
3.
Do not soak resin parts in water over 60°C.
CLEANING
：
1.
Open lens cover. Remove the light bulbs carefully. Disassemble
the screw (#8-32×1-1/4”), and light power connections to
remove grille.
2.
Wash and clean grille. CAUTION: Do not let water into the lamp
base. (Use non-abrasive kitchen detergent, wipe dry with a new
cloth.)
3.
Using a cloth dampened with non-abrasive kitchen detergent,
remove dust and dirt from ventilating fan. Wipe dry with new
4.
Replace grille.
SPECIFICATIONS
Model No. Voltage
(V)
Frequency
(Hz)
Weight
(lb.)
Power
Max.
(W)
Power
@ 0.1SP
(W)
Air Flow
@ 0.1SP
(CFM)
Remark
GBR80HL,
GBR80MHL
120 60 6.4
38.9
11.5 80
Full
speed
5.3 50
Low
speed
GBR100HL,
GBR100MHL
41.1
14.2 100
Full
speed
5.6 60
Low
speed
Note: Design and specifications subject to change without notice.
DIMENSIONS
WARRANTY
cloth.
%RH
50
50 0
60
70
80
CFM
%RH
50
60 0
60
70
80
CFM
DELTA ELECTRONICS THREE YEAR LIMITED WARRANTY
Delta Electronics Inc. (“Delta Electronics”) warrants to the original consumer
purchaser in the USA that the Breez ventilation fan products will be free from
defects in material or workmanship. This warranty is limited to three (3) years
from the original date of purchase.
Limitations and Exclusions
1. During the warranty period, a replacement for any defective product will be
supplied free of charge for installation by the consumer. The warranty
provided herein does not cover charges for labor or other costs incurred in
the troubleshooting, repair, removal, and installation service.
2. All returns of defective parts or products must include the product model
number, and must be made through an authorized Delta Electronics distribu-
tor. Authorized returns must be shipped prepaid. Repaired or replacement
products will be shipped by Delta Electronics F.O.B. shipping point.
3. Delta Electronics shall not be liable for any indirect, incidental,
consequential, punitive, or special damages arising out of or in connection
with products use or performance, regardless of the form of action whether
in contract, tort (including negligence), strict product liability or otherwise.
4. This warranty does not extend to fluorescent lamp starters and tubes.
5. The warranty does not cover if user does not comply with manufacturer’s
installation manual.
6. To qualify for warranty service, you must notify Delta Electronics at the
address or telephone number below.
7. Delta Electronics shall have no liability to the original owner-user with
respect to any defect caused by abuse, misuse, neglect, improper transporta-
tion or storage, improper testing, improper installation, improper operation,
improper use, improper maintenance, improper repair, improper alteration,
improper modification, tampering or accident of products or parts thereof, or
unusual deterioration or degradation of products or parts thereof due to a
physical environment beyond the requirements of products’ specifications.
Address: 4405 Cushing Parkway, Fremont, CA 94538
US Toll Free Number: 1-888-979-9889
