Force-GT DIN Rail Power Supply
24 V 960 W 3 Phase / DRF-24V960W3GBA
TECHNICAL DATASHEET
All parameters are specified at 25°C ambient and AC input
3x unless otherwise indicated.
www.DeltaPSU.com (May 2022, Rev. 00)
8
Engineering Data
Output Load De-rating VS Surrounding Air Temperature
Output Load De-rating VS Input Voltage
0
10
20
30
40
50
60
70
80
90
100
110
-25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
Per
cen
tag
e
of
M
ax L
oad
(%
)
Surrounding Air Temperature (
o
C)
No output power de-rating across the entire
3-Phase input voltage range
Output power de-rating to 80% across the
entire 2-Phase input voltage range
Note
1. Power supply components may degrade, or
be damaged, when the power supply is
continuously used outside the shaded region,
refer to the graph shown in Fig. 1.
2. If the output capacity is not reduced when the
surrounding air temperature exceeds its
specification as defined on Page 3 under
“Environment”, the device will run into Over
Temperature Protection. When activated, the
output voltage will go into bouncing mode and
will recover when the surrounding air
temperature is lowered or the load is reduced
as far as necessary to keep the device in
working condition.
3. In order for the device to function in the
manner intended, it is also necessary to keep
a safety distance as recommended in the
safety instructions while the device is in
operation.
4. Depending on the surrounding air temperature
and output load delivered by the power
supply, the device can be very hot!
5. If the device has to be mounted in any other
for more details.
Fig. 1 De-rating for Vertical Mounting Orientation
> 55°C (3.33% / °C) in Vertical
De-rating for Horizontal Mounting Orientation
> 25°C (2.5% / °C) in Horizontal
Fig. 2 De-rating for AC Input Voltage
2 x 340-575 Vac de-rate power to 80%
―
Vertical Mounting
- - -
Horizontal Mounting
0
10
20
30
40
50
60
70
80
90
100
110
320
340
360
575
Per
cen
tag
e
of
M
ax L
oad
(%
)
Input Voltage (Vac)
―
2-Phase
- - -
3-Phase
