Delta DVW SERIES, User Manual, Page: 61 / 108

DVW Series Industrial IEEE 802.11 a/b/g/n Wireless AP/WDS/Client/Gateway User Manual
Description Factory Default
Enable Wireless Repeating Function
Specify whether the wireless repeating function is enabled or not. Disable
Wireless MAC of this device
Display the wireless MAC address of DVW device. MAC address
Repeater IP Address
Specify an new repeater (WDS Slave) IP address to avoid the
confliction with base station (WDS Master)
None
Disable Wireless Client Association
Specify whether the wireless client can associate with DVW device or
not.
Disable
Base Station MAC Address
Enter the MAC address of base station. None
Notice:
WDS mode only supports None and WEP security mode.
Wireless Security Settings
DVW device provides four standard security modes: None , WEP , WPA , and WPA2 . You also can
specify personal or enterprise version of WPA/WPA2 according to your requirement.
None
Any client can connect to DVW device without any security if you don’t specify wireless security on
DVW. So we suggest you do not set security mode to None security.
WEP
WEP security doesn’t display from 11N mode and any future higher rate wireless mode. It only
displays in 11b only, 11 b/g, 11 g only and 11a wireless mode. If you selects WEP in the web GUI,
only (legacy 802.11 b/g or legacy 802.11 a) can be displayed in the wireless mode list.
3 - 3 9