manualshive.com logo in svg

Delta DVW SERIES, User Manual, Page: 28 / 108

Share
Download
Delta DVW SERIES User Manual Download Page 28

Chapter 3 Featured Function 

 

Notice:

   

The default network setting of DVW device is DHCP mode.   

1.  If there is a DHCP server in the network, than DVW device can get an IP 

address, and the DHCP server function of DVW device will 

Disable

 

automatically. So when PC client or wireless client connects to DVW device and 

send DHCP request to DVW device, it will forward the packet to DHCP server in 

the network. 

2.  If user modifies the network setting of DVW device to Static mode, then DHCP 

server function of DVW device will disable automatically. So when PC client or 

wireless client connects to DVW device and send DHCP request to DVW device, 

it will forward the packet to DHCP server in the network. 

 

3.  If there is no DHCP server in the network, than DVW device can’t get any IP 

address, and the DHCP server function of DVW device will 

Enable

 

automatically. So when PC client or wireless client connects to DVW device and 

send DHCP request to DVW device, it will assign an IP address to the client. And 

IP address of DVW device will be 192.168.1.5. 

 

DHCP mode

: Get an IP 

address from DHCP server. 

Static mode

: Configure an IP 

address manually. 

DHCP server of DVW: 

Disable

 

DHCP mode

: Can’t get any IP 

address from DHCP server. 

DVW IP address: 192.168.1.5 

DHCP server of DVW: 

Enable

 

 

3-6 

Summary of Contents for DVW SERIES













































































































Reviews:

No comments