Load Cell Module DVP02LC-SL
DVP-PLC Operation Manual
31
8. Click “Weight Base Point Command” to set up the weight base point. Now, the weight at CH1 is
1,000kg.
8 Application
Examples
Tension
Control
This is an example of using DVP02LC-SL in a tension control application. The main processing unit is
DVP-SX2 series PLC (DVP20SX2), responsible for the PID operation. The DVP02LC-SL is used for
detecting the tension of the load cell. The measured value is outputted to the brake system from the
DVP04DA-SL analog output module after the PID operation is done by DVP20SX2 in order to control
the tension. See the figure below for the tension control demonstration.
04DA 02LC
20SX2
Load Cell
Load cell
Material feeding
motor
Material winding
spindle motor
