20
(10)
Press the Enter key to finish setting up for a number and move on to set up for the next number.
(11)
Repeat steps (9)~(10) until finishing setup for the last number and press the Enter key. When the
highlight disappears, setup is complete. If there is a need to cancel the setup in the middle, press
the Menu key to return without saving the numbers that were just set.
(12) Select Timeout and press the Enter key to start setting up for timeout.
(13) When the option is highlighted, start setting up by using the Up and Down keys to select the
numbers needed.
(14)
Press the Enter key to finish setting up for a number and move on to set up for the next number.
(15)
Repeat steps (13)~(14) until finishing setup for the last number and press the Enter key. When the
highlight disappears, setup is complete. If there is a need to cancel the setup in the middle, press
the Menu key to return without saving the numbers that were just set.
(16) For Lower and Timeout below, the steps to set up for them are the same as those from (8)~(15).
(17) For other alarm options, the steps to set up for them are the same as those from (4)~(16).
(18) After completing or cancelling the setup, press the Menu key twice to return to the setup menu.
6.3.6 Settings for Demands
■ Method: There is only one mode to calculate fixed interval on the meter.
■
Interval: Time interval to calculate for the demand, with a selectable range of 1~99 min (factory default
is 1 min).
■
Steps to set up are as follows:
(1) Press Menu key until the menu appears.
(2) Select 0. Setup and press Enter key to enter into the setup menu.
(3) Select 7. Demand and press the Enter key to enter into options.
(4) Select the setup item needed and press the Enter key to enter into the option.
(5) Select Interval and press the Enter key to start setting up.
(6) When the option is highlighted, start setting up by using the Up and Down keys to select the
numbers needed.
(7)
Press the Enter key to finish setting up for a number and move on to set up for the next number.
(8)
Repeat steps (6)~(7) until finishing setup for the last number and press the Enter key. When the
highlight disappears, setup is complete. If there is a need to cancel the setup in the middle, press
the Menu key to return without saving the numbers that were just set.
(9) After completing or cancelling the setup, press the Menu key again to return to the setup menu.
