Delta DPM-C510, Operation Manual

Page: 27 / 46

Multi-functional Power Meter DPM-C510 Operation Manual
4-6
_4

Steps:
1. Press NEXT key and the figures would start flickering.
2. Press UP and DOWN keys to select the desired reset setting.
3. Press NEXT key to perform the reset action.
Note: You can go back to the previous setting item by pressing BACK key anytime, whether you have
completed or canceled the setting.
4.2.9 Change Password (Pwd)

Change the password key with 0000 being the default factory setting.

Steps:
1. Press NEXT key and the figures would start flickering.
2. Press UP or DOWN keys to select the figures of the password
3. Press NEXT key to select the next figure.
4. Repeat step 2 and 3 until the last figure is set.
5. Then press NEXT key to complete.
Note: You can go back to the previous setting item by pressing BACK key anytime, whether you have
completed or canceled the setting.
4.2.10 Meter Information (inFo)

Firmware Version:
X.YY

Firmware release date: XXYY (MM.DD)