Appendix
DFS150-485 2D Fixed Scanner User Guide
A-13
Table 66.
GS1 Emulation enable (0x8025)
Bits
Default Value
Access
Description
0
0
R/W
UPC-E0 On/Off
0:Off, 1:On
Table 67.
Command Trigger (0x8500)
Bits
Default Value
Access
Description
0
N/A
WO
You can active the scan engine with serial trigger command,
set the value to 1.
Table 68.
Barcode Status (0x8501)
Bits
Default Value
Access
Description
1:0
N/A
RO
0: The barcode has been taken or no bar code has been
decoded.
2: The new barcode is decoded successfully.
3: The latest decoded bar code overwrote the previous
barcode that has not been taken.
If the barcode is taken by master device, status will reset to
zero.
Table 69.
Barcode Length (0x8502)
Bits
Default Value
Access
Description
6:0
N/A
RO
In slave Modbus mode, the length of barcode should no more
than 120 characters.
Table 70.
Barcode Content (0x8503-0x853E)
Bits
Default Value
Access
Description
7:0
N/A
RO
In slave Modbus mode, the length of barcode should no more
than 120 characters.
1 word(2bytes) = 2 barcode data (ASCII mode)
Table 71.
Firmware Version (0x8800)
Bits
Default Value
Access
Description
15;0
N/A
RO
Firmware Version
Table 72.
Software Reset (0x900A)
Bits
Default Value
Access
Description
0
N/A
WO
After set the parameters, user can reboot DFS by set the
value to one.
