background image

4

6.

Never change direction

of rotation until motor has completely stopped.

7.

Never hold work

in your hand, lap, or against other parts of your body

when drilling.

8.

Do not

use drill as a router or try to elongate or enlarge holes by twisting

the drill. Drill bits may break and cause injury.

9.

Keep hands away

from rotating parts.

10. Keep drill bit clear

of yourself and all objects while installing and

removing bits (see INSTALLING AND REMOVING BITS).

11. Some wood contains preservatives which can be toxic.

Take extra care

to prevent inhalation and skin contact when working with these materials.
Request, and follow, all safety information available from your material supplier.

12.

WARNING: There are certain applications for which this tool was

designed.

Delta strongly recommends that this tool NOT be modified and/or

used for any application other than for which it was designed. If you have any
questions relative to its application DO NOT use the tool until you have written
Delta and we have advised you.

Technical Service Manager
Delta Machinery
4825 Highway 45 North
Jackson, TN 38305

SYMBOL

DEFINITION

V

.......................... volts

A

.......................... amperes

Hz

.......................... hertz

W

.......................... watts

PSI

.......................... pounds per square inch

Min.

.......................... minimum

Max.

.......................... maximum

in.

.......................... inch

MM

.......................... millimeters

h

.......................... hours

min

.......................... minutes

s

.......................... seconds

..........................

alternating current

..........................

direct current

n

0

..........................

no load

..........................

alternating or direct current

..........................

Class II Construction

…/min

..........................

revolutions or reciprocation per minute

SAFETY INSTRUCTIONS FOR CHARGER AND BATTERIES

1.

SAVE THESE INSTRUCTIONS.

This manual contains important safety

and operating instructions for the Delta ShopMaster Battery Charger.

2.

Before using a battery charger,

read all instructions and cautionary

markings on (1) battery charger, (2) battery pack, and (3) product using battery. 

3.

CAUTION: 

To reduce risk of injury, a Delta ShopMaster charger should

only be used to charge a Delta ShopMaster battery pack. Other types of
batteries may burst causing personal injury and damage. Do not charge a
Delta ShopMaster battery pack with any other charger.

906992 - 08-10-02.qxd  8/9/02  4:07 PM  Page 4

Summary of Contents for CL096














Reviews: