6
20. Dispose of expended batteries properly.
The
Delta ShopMaster Battery Packs contains
rechargeable, nickel-cadmium batteries. These
batteries must be recycled or disposed of properly.
Drop off expended battery packs at your local
replacement battery retailer, your local recycling
center, or at a Delta Service Center (see list on back
page of this manual). Applicable fees for the
collection and recycling of these batteries (in the
United States), have been paid to the RBRC
™
. For
further information, call: 1-800-8-BATTERY.
FUNCTIONAL DESCRIPTION
FOREWORD
Your Delta ShopMaster Drill/Driver is designed to drill holes and drive
fasteners in various materials as indicated in the following chart:
RBRC™ is a Trademark of the
Rechargeable Battery Recycling
Corporation.
SWITCH OPERATION
Squeeze trigger switch (A) Fig. 1, to
start motor. Release trigger to stop
motor. As the trigger is squeezed the
motor speed increases.
NOTE:
A low volume, high
pitched tone may be heard
while the switch is in the
variable speed mode. This
is normal.
Fig. 1
FORWARD/REVERSE
• Make sure trigger switch (A) Fig. 1, is in OFF position before attempting to
change direction of rotation.
• Push button (B) Fig. 1, toward left side of drill for FORWARD (clockwise)
rotation.
• Push button (B) Fig. 1, toward right side of drill for REVERSE (counterclock-
wise) rotation.
• Place button (B) Fig. 1, in center position to lock trigger switch in OFF
position.
A
B
MAXIMUM CAPACITIES
SPEED
DRILLING
DRIVING
RANGE
MILD STEEL
ALUMINUM
WOOD SELF-FEED BIT
WOOD SCREWS
LOW
1/4"
1/4"
3/4"
1/4"
HIGH
1/4"
1/4"
3/8"
#8
906992 - 08-10-02.qxd 8/9/02 4:07 PM Page 6
