l
5
ASSEMBLY INSTRUCTIONS
Unpacking
Carefully remove unit from carton. Remove the foam in the housing. Refer to the Package Contents list on page 2
to verify that all parts are present.
Installing the unit
Installing the fan body in an existing building requires an accessible area (attic or crawl space) above the planned
installation location and existing duct and wiring.
CAUTION:
Check area above installation location to ensure that:
•
Duct work can be run and the area is sufficient for proper ventilation.
• Wiring can be run to the planned location.
• No wiring or other obstructions can interfere with installation.
WARNING:
•
To reduce the risk of fire, do not store or use gasoine or other flammable vapors and liquids in the vicinity of the
heater
BEFORE INSTALLATION
1. Attach the duct connector from the housing inside, and secure using the short machine screw.
Hardware
C
Short Machine Screw
Insert tab into
slot in housing
Short Machine Screw
1
2
C
