9
FEATURES
ASSEMBLY
Attach the Saw Arm Assembly
Insert the Water Tray
Figure 5
Figure 6
Figure 7
1. Attach the Saw Arm Assembly to the main frame by
first aligning the Pegs (C) on the Saw Arm Assembly to
the holes on the main frame as shown in Figure 6.
2. Fasten the Saw Arm Assembly by using the
three M10 X 60 Hex Head Screws (H1) and the
8mm Allen Wrench (H2) as shown in Figure 7.
Ensure the saw is on a level
and stable surface.
Insert Water Tray (1) by sliding it into the
Main Frame (2) as shown in Figure 5.
C
1
C
H1
