2
3
TECHNICAL SPECIFICATIONS
Power Supply
120V, 60Hz
Motor Capacity
13A
No-load Speed
5,300RPM
Diamond Cutting Wheel Size
7” Dia.X5/8” (Bore)
Maximum Depth Cut at 0°
2-3/8”
Maximum Depth Cut at 45°
1-1/4”
Tilting Range
0°,22.5°,45°
Maximum Rip Cut
24”
Maximum Square Tile of Diagonal
18”
SAVE THESE INSTRUCTIONS.
Refer to them often and use them to instruct others.
If tool is loaned to someone, also loan them these instructions.
TABLE OF CONTENTS
NOTE:
The manual cover illustrates the current production model. All other illustrations contained in the manual are representative
only and may not be exact depictions of the actual labeling or accessories included. They are intended for illustrative purposes only.
Technical Specifications
............................................. 2
General Safety Instructions
....................................... 3
Safety Symbols ............................................................ .3
Work Area Safety .......................................................... 3
Extension Cords ............................................................ 3
Grounding Instructions .................................................. 4
Personal Safety ............................................................. 4
Tool Safety ................................................................... 5
Service Safety ............................................................... 5
Specific Safety Instructions for Tile Saw
................ 5
Saw Features
................................................................. 7
Unpacking The Saw
..................................................... 8
Shipping Contents ........................................................ .8
Hardware Contents ....................................................... 9
Assembly
....................................................................... .9
Install the Water Tray ................................................... .9
Attach the Saw Arm Assembly ........................................ 9
Attach the Worktable ................................................... 10
Attach the Splash Trays ............................................... 10
Install the Table Extensions ......................................... 11
Attach the Miter Guide ................................................. 11
Moving and Storing Tile Saw
................................... 12
Operation
..................................................................... 12
Lubricating Blade ........................................................ 12
Turning the Saw On and Off
......................................... 13
Making Cuts
................................................................. 14
Parallel Cut ................................................................. 14
Angled Cut ................................................................. 15
Bevel Cut.................................................................... 15
Plunge Cut.................................................................. 15
Adjusting Depth of Cut ................................................ 15
Maintenance
................................................................ 16
Changing the Blade ..................................................... 16
Checking the Bevel ...................................................... 17
Cleaning the Pump ...................................................... 17
Adjustments
................................................................ 18
Trouble Shooting
........................................................ 19
Warranty
...................................................................... 20
Parts, Services Or Warranty Assistance
................ 20
Replacement Parts
..................................................... 20
French
........................................................................... 21
Spanish
......................................................................... 41
