Delta 80SF040J24, Instruction Manual, Page: 14 / 24

11
◆
Insulate the pipe clamp and the drain hose using heat insulation sponge.
① -
Metal clamp (
accessory
)
② -
Insulation sponge (accessory)
(3) When drain hose requires extension, obtain an extension hose commercially available.
(4) After connecting the local drain hose, tape the slits of the heat insulation tube.
(5) Connect the drain hose to the local drain pipe. Position the inter connecting wire in the
same direction as the piping.
(6) Install the Baffle after installation of connection pipe and drainage pipe according to Fig.4
Screws
Hole
Baffle
Fig.10
1) Loosen the screws and adjust the baffle position up and down to clamp connection pipe/
drainage pipe as much as possible.
2) Tighten the screws.
4.2.3 Testing of Drain Piping
(1) After piping work is finished, check if drainage flows smoothly.
(2) Shown in the figure, Pout water into the drain pan from the right side to check that water
flows smoothly from the drain hose.
≤ 4mm
1
2