Delta 80SF040J24, Instruction Manual, Page: 10 / 24

7
3 Preparative for Installation
3.1 Standard Accessory Parts
The standard accessory parts listed below are furnished and should be used as required.
No. Name Appearance Q'ty Usage
1 Special Nut 1
To be used for connecting the
refrigerant pipe
2 Wireless Controller 1 To control the indoor unit
3 Wired Controller 1 To control the indoor unit
3.2 Selection of the Installation Location
NOTE !
The unit installation work must be done by qualified personnel according to the local rules and this
manual.
When removing the unit to the other place, please firstly contact with the local maintenance center.
3.2.1 Basic Requirements for Installation Location
Installation at the following places may cause failure of the air conditioner. If inevitable, please
contact installation and service agent.
(1) A place with heat source, steam and inflammable gas.
(2) A place with high frequency facility, such as radio equipment, electric welder, or medical
equipments.
(3) A seaside saline-alkali place.
(4) A place full of machine oil.
(5) A place with sulphide gas (such as sulphur spring) .
(6) An environment with special conditions.
3.2.2 Installation Location of Indoor Unit
(1) Select a place avoid the inflammable gas produce or leakage.
(2) Select a place avoid the water vapor or oil spayed on the unit.
(3) Ensure that airflow can reach every corner of the room.
(4) Choose a place so that the connection pipe could be easily pulled out.
(5) Select the place where the airflow f the unit can not be blocked.
(6) Select the position where the few outer air influenced.
(7) Select the firm and flat ground.
(8) Ensure sufficient clearance and space for service and maintenance.
(9) Ensure the installation of indoor unit is in conformity with the requirements of installation
dimension drawing.