6
Step 1
Section 1: Crib Assembly
Parts and tools required to complete step.
N. M6 x 65 mm Bolt x 10
M4 Allen Wrench
Supplied
C1, D1
C3, D3
C2, D2
N
Left Crib End Shown
N
N
N
N
Parts Pre-Assembled in the facotry, Ensure ALL bolts are TIGHT.
C3. Left Back Post
D3. Right Back Post
C1. Left End Panel
D1. Right End Panel
C2. Left Front Post
D2. Right Front Post
Attach (1) Crib End Panel (Part C1) to (1) Left Back Post (Part C3) and (1) Left Front Post (Part C2)
using(5) M6x65mm Bolts (Part N). Tighten with the M4 Allen Wrench. Repeat on the other Crib End
(Parts D1, D2 &D3).
NOTE: AFTER ASSEMBLY, THE “STEPPED HOLES” IN BOTH POSTS ARE ON THE SAME SIDE.
