16
Step 2
Section 3: Full Size Bed Conversion
Parts and tools required to complete step.
M4 Allen Wrench
Supplied
To use as a Full Size Bed Headboard only.
Attach (2) Adapter Plates (Part M) to bottom of
Rear Legs using (4) M6x15mm Bolts (Part K).
Hand tighten bolts in place.
Adjust up or down to allow for connection to
Bed Rail. Adapter “Tabs” will keep Adapter Plate
from rotating.
M
M. Adapter Plate x 2
K. M6 x15 mm Bolt x 4
K
M
K
Stand Headboard up. Attach to Bed Frame with
Bolts and Nuts (Supplied by Bed Frame
manufacturer). Adapter Plates (Part M) can be
adjusted up or down to best suit bed frame.
Tighten all bolts once bed rail is adjusted.
NOTE: BED FRAMES ARE NOT SUPPLIED
WITH THIS SYSTEM, BUT CAN BE
PURCHASED AT MATTRESS STORES.
