background image

3

IMPORTANT SAFETY RULES FOR

DUST COLLECTORS

WARNING:

Basic precautions

should always be followed when using your dust
collector. To reduce the risk of injury, electrical
shock or fire, comply with the safety rules listed
below:

1.

DO NOT

leave the dust collector plugged into the

electrical outlet. Unplug dust collector from the outlet
when not in use and before servicing, changing bags,
unclogging and cleaning.

2.

ALWAYS

turn all controls “OFF” before unplugging

the dust collector.

3.

W A R N I N G : T O R E D U C E T H E R I S K O F

ELECTRICAL SHOCK

, do not use on wet surfaces. Do

not expose to rain. Store indoors.

4.

FOLLOW

all electrical and safety codes, including

the National Electric Code (NEC) and the Occupational
Safety and Health Regulations (OSHA). All electrical
connections and wiring should be made by qualified
personnel only.

5.

DO NOT

use the dust collector to pick up

flammable or combustible liquids, such as gasoline.

NEVER

use the dust collector near any flammable or

combustible liquids.

6.

USE

the dust collector to pick up wood materials

only. 

DO NOT

use the dust collector to pick up metal

shavings, metal dust, or metal parts.

7.

NEVER 

use the dust collector to dissipate fumes

or smoke.

NEVER

pick up anything that is burning or

smoking, such as cigarettes, matches or hot ashes.

8.

DO NOT

pull the dust collector by the power cord.

NEVER 

allow the power cord to come in contact with

sharp edges, hot surfaces, oil or grease. Do not place
anything over the top of the power cord.

9.

DO NOT

unplug the dust collector by pulling on the

power cord. 

ALWAYS

grasp the plug, not the cord.

10.

DO NOT

handle the plug or dust collector with wet

hands.

11.

REPLACE

a damaged cord immediately.

DO NOT

use a damaged cord or plug. If the dust collector is not
operating properly, or has been damaged, left outdoors
or has been in contact with water, take it to an
Authorized Service Center for service.

12.

DO NOT

use the dust collector as a toy. 

DO NOT

use near or around children.

13.

DO NOT

insert fingers or foreign objects into the

dust intake port. Keep hair, loose clothing, fingers, and
all body parts away from openings and moving parts of
the dust collector.

14.

DO NOT

use with any opening blocked; keep

openings free of dust, lint, hair, and anything that may
reduce air flow.

15.

NEVER

operate the dust collector without the dust

collection bag in place and properly secured.

16.

ALWAYS

use intake caps to cover unused dust

ports when the dust collector is not in use.

17.

PERIODICALLY INSPECT 

dust bag for any cuts,

rips or tears.

NEVER 

operate the dust collector with a

damaged bag or vacuum hose.

18. The dust collector is designed for home use or light
commercial duty 

ONLY!

19.

CONNECT

dust collector to a properly grounded

outlet only. See grounding instructions.

20.

USE EXTRA CARE

when cleaning on stairs.

NOTICE: THE MANUAL COVER PHOTO ILLUSTRATES THE CURRENT

PRODUCTION MODEL.  ALL OTHER ILLUSTRATIONS ARE REPRESENTATIVE

ONLY AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING OR

ACCESSORIES AND MAY BE INTENDED TO ILLUSTRATE TECHNIQUE ONLY.

SAVE THESE INSTRUCTIONS. 

Refer to them often 

and use them to instruct others. 

Summary of Contents for 50-861

















Reviews: