21
Fig. 63
DRESSING THE DRY GRINDING
WHEEL
A stick type dresser (A) Fig. 63, is supplied with your
sharpening center to dress the dry grinding wheel. Bring
the dresser stick (A) forward on the tool rest until it just
touches the high point of the face of the wheel and dress
the wheel by moving the dresser stick back and forth.
Repeat this operation until the face of the wheel is clean
and the corners of the wheel are square.
A
MAINTENANCE
KEEP MACHINE CLEAN
Periodically blow out all air passages with dry compressed
air. All plastic parts should be cleaned with a soft damp
cloth. NEVER use solvents to clean plastic parts. They could
possibly dissolve or otherwise damage the material.
Wear ANSI Z87.1 safety glasses while
using compressed air.
FAILURE TO START
Should your machine fail to start, check to make sure the
prongs on the cord plug are making good contact in the
outlet. Also, check for blown fuses or open circuit breakers
in the line.
Summary of Contents for 23-710
Page 23: ...23 NOTES...
