(847) 526-2407 Fax (847) 526-4456
(800) 526-7887
NOMINal COMPONENT DIMENSIONS
Component
Dimensions
DTC-24 panel
Dia./H/L: 7”/4.75”/2.5” (18/12/6 cm)
MP sensor
Dia./H: 5”/4” (13/10 cm)
MP sensor conduit
Dia./H/L: 3”/4”/6” (8/10/15 cm)
MMP sensor
RG sensor
Dia./H: 2”/1” (5/2.5 cm)
RG external thermistor
16” (40.6 cm)
RG sensor adhesive pad
2” x 3” (6 x 8 cm)
MP2
sensor
Dia./H: 5”/4” (13/10 cm)
SMMP sensor
RGS sensor
Dia./H: 2”/1” (5/2.5 cm)
RGS sensor adhesive pad
2” x 3” (6 x 8 cm)
RID switch
H/W: 2.75”/4.5” (7/11)
INPuT POwER REQuIREMENTS
24 VAC or 24 VDC
Note:
Input power can be provided from a Power Control
Panel with G.F.P.E.
PRIMaRY SENSORS
MP SENSOR
The MP is a slab mounted (flush with the surface) moisture
and slab temperature sensor. It is selected when the DTC-
24S is being used to control snow melting cables.
MMP SENSOR
The MMP is an aerial mounted ambient temperature and
moisture sensor. It is installed when the DTC-24A is being
used to control snow melting or roof de-icing cables.
RG SENSOR
The RG is a gutter mounted ambient temperature and mois-
ture sensor. It is installed when the DTC-24R is being used
to control snow melting or roof de-icing cables.
OPTIONal SECONDaRY SENSORS
MP2
The
MP2
is an optional slab mounted moisture sensor. One
MP2
can be used with the DTC-24S for a total of two sen-
sors.
SMMP
The SMMP is an optional aerial mounted moisture sensor.
Up to three can be used with the DTC-24A for a total of four
sensors
RGS
The RGS is an optional gutter mounted moisture sensor. Up
to three can be used with the DTC-24R for a total of four
sensors.
OPTIONal TRaNSfORMER
DTC-TRaNSfORMER
120 volts to 24 volt DT wall mount plug-in transformer class
2, 28.5 watts. It is required with load switching panels that
do not provide a 24 VAC or 24 VDC power source.
The DTC-Transformer will not be required when the DTC-24
is installed with the Delta-Therm Power Control Panel with
G.F.P.E.
SENSOR wIRE ExTENSION ChaRT
wire Gauge
Maximum Sensor Cable length ft. (m)
16 awG
1000’ (305)
18 awG
600’ (183)
20 awG
400’ (122)
22 awG
250’ (76)
DTC-24 SYSTEM OPTIONS
Part No.
Description
RID
Remote Indication And Activation Timer
RGS
Optional Secondary Gutter Mounted Moisture Sensor
MP
Optional Slab Mounted Temperature/Moisture Sensor
MP2
Optional Secondary Slab Mounted Moisture Sensor
MMP
Optional Aerial Mounted Temperature/Moisture Sensor
SMMP
Optional Secondary Aerial Mounted Moisture Sensor
MPR
Sensor Replacement Kit. Contains Materials To Replace One MP
MMPR
Sensor Replacement Kit. Contains Materials To Replace One MMP
MPSwP-50
Plenum Rated And UV Inhibited Six Conductor #22 AWG Sensor
Extension Wire For RG, RGS, MP, or MMP Sensor
