Delta Tau PMAC2-PC/104, Installation Manual

Page: 30 / 74

PMAC2A-PC/104
PMAC2A-PC/104 Software Setup 23
following table:
I54 Baud Rate I54 Baud Rate
0 600 8 9600
1 900 9
14,400
2 1200 10 19,200
3 1800 11 28,800
4 2400 12 38,400
5 3600 13 57,600
6 4800 14 76,800
7 7200 15 115,200
For a saved value of 0 for I46, the serial baud rate is determined by the combination of I54 and the CPU
frequency as shown in the following table.
I54
Baud Rate for
40 MHz CPU
Baud Rate for
60 MHz CPU
Baud Rate for
80 MHz CPU
0 600 DISABLED 1200
1 900* (-0.05%) 900 1800* (-0.1%)
2 1200 1200 2400
3 1800* (-0.1%) 1800 3600* (-0.19%)
4 2400 2400 4800
5 3600* (-0.19%) 3600 7200* (-0.38%)
6 4800 4800 9600
7 7200* (-0.38%) 7200 14,400*(-0.75%)
8 9600 9600 19,200
9 14,400*(-0.75%) 14,400 28,800*(-1.5%)
10 19,200 19,200 38,400
11 28,800*(-1.5%) 28,800 57,600*(-3.0%)
12 38,400 38,400 76,800
13 57,600*(-3.0%) 57,600 115,200*(-6.0%)
14 76,800 76,800 153,600
15 DISABLED 115,200 DISABLED
* Not an exact baud rate
DAC Outputs Configuration
The following I-variables has to be properly set for using the digital-to-analog (DAC) outputs:
I900 = 1001
I901 = 2
I902 = 3
I906 = 1001
I9n6 = 0
; n = channel number from 1 to 8
Ix69 = 1024
; x = motor number from 1 to 8