Delta Tau PMAC 1.5 Lite, Hardware Reference Manual

Page: 14 / 49

PMAC-Lite Hardware Reference
E-Point Descriptions 9
E-POINT DESCRIPTIONS
E1 - E2: Machine Output Supply Voltage Configure
E Point & Physical
Layout
Location Description Default
E1 E1
CAUTION
The jumper setting must match the
type of driver IC, or damage to the IC
will result.
Jump pin 1 to 2 to apply +V (+5V to
24V) to pin 11 of “U26” (should be
ULN2803A for sink output
configuration) JOPTO “Machine”
outputs M01-M08
Jump pin 2 to 3 to apply GND to pin
11 of U26 (should be UDN2981A for
source output configuration)
1-2 Jumper
installed
E2 D1
CAUTION
The jumper setting must match the
type of driver IC, or damage to the IC
will result.
Jump pin 1 to 2 to apply GND to pin
10 of “U26” (should be ULN2803A
for sink output configuration).
Jump pin 2 to 3 to apply +V (+5V to
24V) to pin 10 of “U26” (should be
UDN2981A for source output
configuration).
1-2 Jumper
installed
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com