After removing the power source from the equipment, wait at least 10 minutes before touching or
disconnecting sections of the equipment that normally carry electrical charges (e.g., capacitors, contacts,
screw connections). To be safe, measure the electrical contact points with a meter before touching the
equipment.
The following text formats are used in this manual to indicate a potential for personal injury or equipment
damage. Read the safety notices in this manual before attempting installation, operation, or maintenance
to avoid serious bodily injury, damage to the equipment, or operational difficulty.
WARNING:
A
Warning
identifies hazards that could result in personal injury or death. It
precedes the discussion of interest.
Caution:
A
Caution
identifies hazards that could result in equipment damage. It precedes
the discussion of interest
Note:
A
Note
identifies information critical to the user’s understanding or use of the
equipment. It follows the discussion of interest.
