DRTQ Series Manual
10
Using Quick Run
1. Select
[Quick Run]
from the main menu.
2. Select the correct units of measurement, you can adjust the
setting by selecting the black arrows.
3. Select the mode of measuring (Peak or Track), you can
adjust the mode by the selecting the back arrows. Refer to
Figure 10.1 to view an example of the Quick Run screen.
4. The Quick Run mode has feature that allows the user to
graph the
Peak Time.
5. To Adjust the length of time on the graph, please refer to
Adjusting Your Settings, Peak Time
.
Using Measure Mode
1. Select
[Measure Mode]
from the main menu.
2.
[Peak]
or
[Track]
, if you are unsure which testing mode
you should select, refer to the glossary of terms at the
beginning of this manual for clarification. Press the
[Next]
arrow
3. Select a user profile. Please note that a user profile
is customized to each specific testing. Changes to
the profile settings can be performed from
the
[Settings]
>
[Profile]
start up screen menus.
Measuring Torque
Fig. 10.1
Fig. 10.2
Fig. 10.3
Fig. 10.4
