1
Check before Use
Equipped Accessories
Before the use of the Automatic Screw Feeder, please carefully check whether the following
accessories are complete:
Hex-key wrench 2.0*107mm (L type) *1
Voltage stabilizing transformer
AC 100~240V/DC12V*1
Rear specification sheet for sliding track rear
20*10*0.2mm*2pcs&0.5mm*6pcs
Operation manual *1
Jig plates, 1pcs each for 0.8/1.0/1.2/1.5/2.0
Check Screw Dimension
Before the use of the Automatic Screw Feeder, please check the dimension of the screw used, and
use the Vernier Caliper to perform measurements according to the following drawings:
Table a
a
Screw head width
b
Screw head thickness
c
Screw length
d
Screw diameter
e
Screw total length
