DRFF-208R / DRFF-512R / DRFF-519R Screw Feeder
Operation and Setup Manual
www.deltaregis.com
8
User Adjustments
Chute Adjustment (Continued)
2. Adjust the chute to align with the center of the rail.
NOTE:
The chute must not come into contact with the rail. A 0.8 -
1.0mm gap must be maintained. For certain screws, it may
be necessary to move the chute to the extreme left or right
for better feeding.
Brush Adjustment
1. Loosen the highlighted screws using a 2.5mm hex key.
0.8-1.0m m
DRFF-512R/519R
DRFF-208R
