Delta OHM HD32.2, Manual

Page: 34 / 52

- - 34
8. CONNECTION TO A PC
HD32.2 is provided with M12 connector for the connection to the PC.
Using HD2110/RS cable , you can connect it to the PC serial port.
Using HD2110/USB cable, you can connect it to the PC USB port.
The instruments are supplied with DeltaLog10 software. With the software you can manage the
connection operations to the PC, the data transfer, the graphic introduction, the acquired or memo-
rized data printing.
DeltaLog10 software has an "On-line Help" (also in pdf format) that describes the features
and the functions.
Moreover, the instruments are compatible with supplied HyperTerminal communication program
with Windows (from Windows 98 to Windows VISTA) operational systems.
8.1 C
ONNECTION TO
RS232-C
SERIAL PORT
1. The measuring instrument has to be switched off.
2. Connect the measurement instrument with HD2110 /RS cable to the first free serial port (COM)
of the PC.
3. Switch the instrument on and set the baud rate to 38400 (MENU key >> “ Serial ” >> “ Baud Rate
>> select 38400 using the arrow keys >> confirm with ENTER). The parameter remains in the
memory.
4. Launch the DeltaLog10 application and press CONNECT. Wait for the connection to occur and
follow the indications on the screen.
For a description of the DeltaLog10 application, please
refer to its On-line Help.
8.2 C
ONNECTION TO
USB 2.0
PORT
Go on as indicated below:
1. Do not connect the instrument to the USB port until it is not expressly requested to do it.
2. Insert the DeltaLog10 CD-Rom and select the " Install/Remove USB driver " item.
3. The program checks the presence of the drivers on the PC: the installation starts if they are not
present; if they are already installed, the drivers are removed by pressing the key.
4. The installation program prompts the software user license: to proceed, the software usage
terms must be accepted - click on YES .
5. On the next page, the folder where the drivers will be installed is indicated: Confirm without
modifying.
6. Complete the installation by clicking on Finish . Wait few seconds until the DeltaLog10 page
appears.
7. Close DeltaLog10.
8. Connect the measurement instrument to the PC USB port using HD2110/USB cable. When
Windows detects the new device, the " New software installation wizard " is started.
9. If you are asked for the authorization to search an updated driver, answer NO and continue.
10. In the installation window, select “ Install from a list or specific location ”.
11. In the next window select “ Search for the best driver in these locations ” and “ Include this lo-
cation in the search ”.